Building Automation MODULY_ROZSZERZENIA_1AO_2DO - STERKRAK
Polski / English
Find
Extension Modules 1AO/2DO
Relay modules converting analog output voltage of the controller (AO) to three or four state sequences of two relay outputs (DO).

Analog To Digital Extension Device MS101

The MS101 converts the analog input signal (0 - 10V) from the controller to four discrete, voltageless output states. Relays have SPDT contacts.

Switching sequence: 0 S1 0 S2 MS101 diagram


Sequential Control Device MS2

The MS2 converts the analog input signal (0 - 10V) from the controller to three discrete, voltageless output states. Relays have SPDT contacts.

Switching sequence: 0 S1 S2 MS2 diagram


Sequential Control Device MS12

The MS12 converts the analog input signal (0 - 10V) from the controller to three discrete, voltageless output states. Relays have SPDT contacts.

Switching sequence: 0 S1 S1+S2 MS12 diagram


Sequential Control Device MS112

The MS112 module is functional equivalent of the USS112 and USS112P which converts the analog input signal (0 - 10V) from the controller to four discrete, voltageless output states. Relays have SPDT contacts.

Switching sequence: 0 S1 S2 S1+S2 MS112 diagram

Sequential Control Device USS112

The USS112 module is two relay module that converts the analog input signal (0 - 10V) from the controller to four discrete, voltageless output states. Relays have SPST-NO contacts.

Switching sequence: 0 S1 S2 S1+S2 USS112 diagram

Sequential Control Device USS112P

The USS112P module is two relay module that converts the analog input signal (0 - 10V) from the controller to four discrete, voltageless output states. Relays have SPDT contacts.

Switching sequence: 0 S1 S2 S1+S2 USS112P diagram


Sequential Control Device MS121

The MS121 module is functional equivalent of the USS121 and USS121P which converts the analog input signal (0 - 10V) from the controller to four discrete, voltageless output states. Relays have SPDT contacts.

Switching sequence: 0 S1 S1+S2 S2 MS112 diagram

Sequential Control Device USS121

The USS121 module is two relay module that converts the analog input signal (0 - 10V) from the controller to four discrete, voltageless output states. Relays have SPST-NO contacts.

Switching sequence: 0 S1 S1+S2 S2 USS121 diagram

Sequential Control Device USS121P

The USS121P module is two relay module that converts the analog input signal (0 - 10V) from the controller to four discrete, voltageless output states. Relays have SPDT contacts.

Switching sequence: 0 S1 S1+S2 S2 USS121P diagram